Stationary boom concrete pumps
Stationary boom concrete pumps are placement boom concrete pump, which adopt hydraulic systems to transport the concrete. When this type concrete pumps used on the truck also known as Cement truck hydraulic pumps.
Share us:

Description

Brief introduction:

Stationary boom concrete pumps are placement boom concrete pump, which adopt hydraulic systems to transport the concrete. When this type concrete pumps used on the truck also known as Cement truck hydraulic pumps.

For reducing time cost, we normally used stationary booms and with concrete pumps replacing truck-mounted concrete pumps, stationary booms are able to offer efficient concrete placement They provide high-performance and practical solutions. They reduce the time required for placing the concrete and increase productivity.

More of time, we should used stationary boom concrete pumps with concrete mixer truck. How to install stationary boom concrete pumps?
In the initial phase, the freestanding boom, mounted on a tubular column or lattice tower, is used to concrete the base plate and the first floor.
Following this initial phase, the climbing boom uses the integrated lifting equipment to move up through the floors and shafts to the height of the higher floors still to be constructed.
On large construction sites, the displaceable boom can be moved from one tubular column to another using the quick release system.

Some advantages of Stationary boom concrete pump
1.Easy to transport and set up
2.short set-up times
3.secure handling
4.grows upwards with the structure
5.small space requirement
6.with or without counter-weight (depending on application)

Cement truck hydraulic pumps include concrete pump which used hydraulic systems, such as stationary boom concrete pumps which used with concrete truck mixer.

 

Features and benefits:
Model Units JH5018 JH5021 JH5025
Max. Output m³/h 50 50 50
Max. outlet pressure  (H/L pressure) Mpa 13/7.6 13/7.6 13/7.6
Rated working pressure Mpa 31.5 31.5 31.5
Hopper capacity m3 0.65 0.65 0.65
Feeding height mm 1500 1500 1500
Oil cylinder diameter mm DN125 DN125 DN125
Concrete cylinder diameter mm DN200 DN200 DN200
Max. placing height m 18 21 25
Rotary angle ° 365 365 365
Arm foldable angle ° 90/180/360 90/180/360 90/180/360/540
Arms section quantity section 3 3 4
Chassis model   DONGFENG DONGFENG SINOTRUCK
Power of engine kw 132 132 140
Emission standard   National IV National IV National IV
Total weight of vehicle kg 14000 14500 15500
Overall dimension of vehicle (L*W*H) mm 9350×2500×3500 9450×2500×3535 9650×2500×3535
Hydraulic oil hopper capacity L 300 300 300
Water tank capacity L 300 300 300

inquiry