Faq

Safety signs for concrete mixers

28Apr

Concrete mixer manufacturers should introduce the safety signs clearly, such as the warn signal are printed on the mixer surface or other prominent place. Safety signs for concrete mixers shall be replace that are missing or illegible.
warning.jpg
How to protect the safety signs or replace them during some conditions?
1. Keep safety signs clean and legible at all times.
2. Replace safety signs that are missing or have become illegible.
3. Replaced parts that displayed a safety sign should also display the current sign.
4. Safety signs are available from your Distributor or the factory.

How to Install Safety Signs:
• Be sure that the installation area is clean and dry
• Remove the smallest portion of the split backing
• Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place.
• Small air pockets can be pierced with a pin and smoothed out using the piece of sign backing paper.
• Align the sign over the specified area and carefully press the small portion with the exposed sticky backing in place.
• Decide on the exact position before you remove the backing paper.
• Remove the smallest portion of the split backing paper.
• Align the sign over the specified area and carefully press the small portion with the exposed sticky backing in place.
• Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place.
 


Relative Articles:
Maintenance safety, how should the concrete equipment operator do?
Planetary concrete mixers
self-loading concrete truck mixers
What precautions should the concrete batch plant operator do?
What do we should do before operating concrete mixer?

back to the list